Solar Charge Controller : 12V 24V Autoswitch 100W Solar Panel 10A Solar Charge Controller Regulator Lihat Ukuran Penuh

Solar Charge Controller : 12V 24V Autoswitch 100W Solar Panel 10A Solar Charge Controller Regulator

Controller untuk Solar Panel dan charging ke batrey
cocok untuk daerah yang tidak terjangkau listrik

Lebih detail

1038

Rp‎. 200.000

Controller untuk Solar Panel dan charging ke batrey
cocok untuk daerah yang tidak terjangkau listrik

10A Solar Panel Charge Controller Regulator 12V/24V 240W CMP SERIES Compatible with 240W solar panel, Max current is
10A.Function:According to the voltage of battery, Solar charge controller will adjust the charging current and decide the way of charging the battery.


1.Function:
According to the voltage of battery,controller will adjust the charging current and decide if to supply power to the loads.
1.Generally keep the battery on full voltage condition.
2.Prevent the battery from over-charging.3.Prevent the battery from over-discharging.
4. Prevent the battery from supplying power to solar panels during nights.

2.Installation:

1).Connection:
according to indication in the picture:
(1). Connect+ and - poles of battery with the correct ports on the Controller (the third and fourth wires from the left).
(2). Connect + and -poles of solar panels with the correct ports on the controller (the first and second wires from the left).
(3). Connect + and - poles of load with the correct ports on the controller (the fifth and sixth wires from the left).

2)Indicator light:
(1). Three red LED. They indicate the voltage of battery. It indicates the voltage enough that three red LED are all illumining, and the voltage not enough that there is only one red light LED illumining.
(2). One green LED. The battery is strongly charged when this light is illumining, the battery is floatingly charged when this LED is flickering, and the battery has stopped charging when the LED unlighted.
(3). The voltage of battery is little low when one red LED or two red LED are illumining, maybe the load cant naturally work. But when the voltage of battery reaches 12.6v, the load will be allowed automatically to start work.